8
Operating instructions
Passive distribution module
PDM-IOP-4CC-IOP
EN
5. Set-up and maintenance
5.1 Functional testing
A check must be carried out to ensure that the projected safety function
is effective.
The safety function, the DIP switch configuration and correct
installation must be checked by the responsible safety
specialist / safety representative.
5.2 Maintenance
If installed correctly and used as intended, the passive distribution
module requires no maintenance.
6. Disassembly and disposal
6.1 Disassembly
The passive distribution module may only be removed when
de-energised.
6.2 Disposal
The passive distribution module is to be disposed of in the correct
manner as per the national regulations and legislation.
K. A. Schmersal GmbH & Co. KG
Möddinghofe 30, D - 42279 Wuppertal
Postfach 24 02 63, D - 42232 Wuppertal
Phone: +49 - (0)2 02 - 64 74 - 0
Telefax: +49 - (0)2 02 - 64 74 - 1 00
E-Mail: info@schmersal.com
Internet: http://www.schmersal.com
