Installation manual
Page 141 of204
Remedy
Check the theory of the distance using the configured data or the
sensor setting
Check the position signal
Are all signals correctly connected to the 9-pole encoder plug?
Check the encoder plug for correct wiring.
If proximity switches are used, these are correctly connected.
Use the SCOPE function to adjust superimposable position signals
A 3327 / A 3328
Alarm message
Plausibility fault position range axis 2
Cause
The current position is outside the configured measuring length
Remedy
Check the theory of the distance using the configured data or the
sensor setting
Check the position signal, if necessary correct the offset
Use the SCOPE function to read out the position and to set into
relation to configured values
A 3329 / A 3330
Alarm message
Plausibility fault because of faulty speed axis 2
Cause
The current speed is outside the configured maximum speed
Remedy
The drive moves outside the permissible and configured speed range
Check configuration
Use the SCOPE function to analyse the course of speed
A 3331 / A 3332
Alarm message
Configuration fault: Acceleration axis 2
Cause
The current acceleration is outside the configured acceleration range
Remedy
The drive has exceeded the permissible acceleration range
Check the configuration of maximum speed
Use the SCOPE function to analyse the course of speed/acceleration
A 3333 / A 3334
Alarm message
Plausibility fault of SinCos encoder
Cause
Wrong encoder type connected
Remedy
Check configuration
Check encoder assignment
A 3337 / A3338
Fault message
Incremental encoder axis 2 faulty
Cause
Track A does not match track B
Remedy
Check encoder wiring
Check encoder configuration
A 3407 / A 3408
Alarm message
Difference level RS485Treiber1 fault INC_B or SSI_CLK faulty
Cause
No encoder connection
Wrong encoder type connected
Remedy
Check encoder connection
Check encoder wiring
Summary of Contents for PSCBR-C-10 Series
Page 1: ...Installation manual Page 1 of204 Installation Manual For PSCBR modules Series PSCBR C 10...
Page 178: ...Installation manual Page 178 of 204...
Page 181: ...Installation manual Page 181 of 204 Example for a risk analysis Gefahrenanalyse Risk analysis...
