Installation manual
Page 180 of 204
Example for an automatic handling machine:
Description of function:
The automatic handling machine serves the purpose of automatically picking up truck cabins
of different heights. After being picked up, the height of the cabin is correctly detected, so that
within the working area the cabin cannot be lowered below a certain height. Within the working
area the automatic machine must not exceed a maximum speed. Once the cabin has been
completely finished, it is put down at the end of the processing line and the automatic handling
machine moves along a return track back to the beginning of the track to pick up the next
cabin.
Limits of the machine:
Spatial limits: The working area must provide sufficient space for the workers, so that they are
able to carry out all necessary work on the cabin..... In the return pass there must be sufficient
space for the empty suspension gear of the automatic handler...
Temporal limits: Description of lifetime, description of ageing processes, which could cause
changes of machine parameters, (e.g. brakes). Monitoring mechanisms must be implemented
for such cases.
Limits of use: The automatic machine automatically fetches new cabins and moves these
through a processing area. Workers work in the processing area .... etc.
The following operating modes are intended: Setup operation, automatic operation and service
operation ... etc.
Identification of dangers:
The following dangers are of relevance with the automatic handling machine:
Danger 1: Crushing by cabin / lifting beam falling down
Danger 2: Impact by moving cabin / lifting beam
Danger 3: Crushing by too fast lowering of the cabin in case of a fault
Danger 4:..............
Risk analysis:
G1: The weight of cabin and lifting beam is so high, that it will cause irreversible crushing or
even fatalities.
G2: The moving cabin/lifting beam may cause impacts that can lead to irreversible injuries.
G3: …
Risk assessment
A risk reduction is required under due consideration of all operating conditions.
Inherently (risk from the project) safe design
Movement of the cabin in direction x and y within the working area cannot be avoided. In the
processing area the cabin must be moved up/down ...
The following measures can be applied:
Avoid dangers caused by too fast movements
Avoid dangers caused by too small distances
……
Summary of Contents for PSCBR-C-10 Series
Page 1: ...Installation manual Page 1 of204 Installation Manual For PSCBR modules Series PSCBR C 10...
Page 178: ...Installation manual Page 178 of 204...
Page 181: ...Installation manual Page 181 of 204 Example for a risk analysis Gefahrenanalyse Risk analysis...
