Installation manual
Page 4 of27
1 Important notes
Definition of individual target groups
Project engineers for secure drive systems:
Engineers and technicians
Assembly, electric installation, maintenance and replacement of devices:
Maintenance electricians and service technicians
Commissioning, operation and configuration:
Technicians and engineers
1.1
Definitions
The designation PSCBR-C-100 is used as generic term for all derivatives from the PSCBR-
C-100 product range. Wherever this description refers to a certain derivative, the complete
designation is used.
The term
“safe” used in the following text in any case refers to the classification as a safe
function for application up to Pl e acc. to EN ISO 13849-1 or SIL3 acc. to EN 61508.
The system software
“SafePLC” serves the purpose of configuring and programming
PSCBR-C-100 modules.
The modules of the PSCBR-C-100 series are internally built up of two independent
processing units. In the following these are referred to as system A and system B.
1.2
Co-valid documents
Description
Reference
Installation Manual for Series PSCBR-
C-100
HB-37420-810-01-xxF-DE PSCBR-C-
100 Installation Manual
Acceptance test
TÜV certificate for product modules
PSCBR-E-133-12DI-2DIO-8RO
Note:
Thoroughly read the manuals before you start the installation and the commissioning
of the PSCBR-C-100 module.
Paying attention to the documentation is a prerequisite for trouble-free operation and
fulfilment of possible warranty claims.
