background image

4

Operating instructions

Safety fieldbox

SFB-PN-IRT-8M12-IOP-V2

EN

Safety response times, SFB-PN-V2

The overall reseponse time of a safety function is made up of the 

following:

•  Response time of the connected safety switchgear

• Delay time safety fieldbox SFB-PN-V2 (WCDT_Input ≤ 20 ms)

•  PROFINET/PROFIsafe transmission time

•  Cycle time F runtime group F-PLC

•  Response time of safety shut-off element (actuator)

In addition to the maximum response time of the  

SFB-PN-V2, the response times of the connected safety 

switchgear, the transmission time from PROFINET and the 

response times of additional PROFIsafe components (if 

applicable) must be taken into consideration.

The maximum acceptable response times of the safety 

functions are defined in the risk analysis of the machine.

3.  Mounting

The field box must be installed in a way that only authorised 

specialist personnel can access it.

3.1  General mounting instructions

Fasten fieldbox with two M6-screws on a flat mounting surface, for 

mechanically strain-free installation. The maximum tightening torque is 

3.0 Nm. Any mounting position.

Do not install fieldbox outside closed rooms.

3.2  Dimensions

All measurements in mm.

I

E

I

E

3

2

1

0

7

6

5

4

I

E

I

E

I

E

I

E

I

E

I

E

BF

SF

Err
Pwr

A

L

A

L

P2

P1

Power

I

O

20

1,8

222,8

63

25,6

36,1

3.3  Accessories

Further accessories can be found under the search term "SFB-PN" in 

the Schmersal Online Catalogue at 

products.schmersal.com

.

3.3.1 Pre-wired and connecting cables

Device connection – Cable M12, 8 poles, straight, A-coded

0.5 m

Connecting cable, male / female connectors

101217786

1.0 m

Connecting cable, male / female connectors

101217787

1.5 m

Connecting cable, male / female connectors

101217788

2.5 m

Connecting cable, male / female connectors

101217789

3.5 m

Connecting cable, male / female connectors

103013428

5.0 m

Connecting cable, male / female connectors

101217790

7.5 m

Connecting cable, male / female connectors

103013429

10.0 m

Connecting cable, male / female connectors

103013125

15.0 m

Connecting cable, male / female connectors

103038984

20.0 m

Connecting cable, male / female connectors

103038566

30.0 m

Connecting cable, male / female connectors

103038567

Power – Cable M12, 4 poles, straight, T-coded

5.0 m

Pre-wired cable, female connector

103013430

10.0 m

Pre-wired cable, female connector

103013431

20.0 m

Pre-wired cable, female connector

103038975

30.0 m

Pre-wired cable, female connector

103038976

1.5 m

Connecting cable, male / female connectors 

103025136

3.0 m

Connecting cable, male / female connectors

103013432

5.0 m

Connecting cable, male / female connectors

103013433

7.5 m

Connecting cable, male / female connectors

103013434

10.0 m

Connecting cable, male / female connectors 

103038978

Ethernet – Cable M12, 4 poles, straight, D-coded, shielded

5.0 m

Connecting cable, RJ45 to connector M12

103013435

7.5 m

Connecting cable, RJ45 to connector M12

103013436

10.0 m

Connecting cable, RJ45 to connector M12

103013437

20.0 m

Connecting cable, RJ45 to connector M12 

103038980

1.5 m

Connecting cable, male / male connectors 

103038982

3.0 m

Connecting cable, male / male connectors

103013438

5.0 m

Connecting cable, male / male connectors

103013439

7.5 m

Connecting cable, male / male connectors

103013440

10.0 m

Connecting cable, male / male connectors 

103038983

3.3.2 Adapter cables

M12-Adapter cables, 8 poles to 4 poles

2.5 m

VFB-SK8P/4P-M12-S-G-2,5M-BK-2-X-A-4 103032864

5.0 m

VFB-SK8P/4P-M12-S-G-5M-BK-2-X-A-4

103032865

Y-Adapter cables for Schmersal AOPD

1.0 m

SFB-Y-SLCG-COM-8P-S-G-1M-BK-2-X-A-4 103032866

1.0 m

SFB-Y-SLCG-8P-S-G-1M-BK-2-X-A-4

103032867

3.3.3 Further accessories

Sealing stickers for inspection window, 4 pcs

103013919

Protective caps for M12 sockets, 10 pcs

103013920

Labels, frame 4 x 5 pcs

103035090

Summary of Contents for SFB-PN-IRT-8M12-IOP-V2













Reviews: