4 Set-up
57
With TCI support, the default parameter settings are transferred to the
SFB Configuration Tool when it is started.
The SFB Configuration Tool displays all the settings and requests you to check
and confirm the displayed parameters.
The SFB Configuration Tool automatically detects the part number of the
connected field box when starting with TCI support.
In addition, project planning data can also be entered here.
When saving the configuration, these data are stored in addition to the parameters
in the project file.
The corresponding network parameters can be opened and edited via "Search".
If you now select "Validation", the device parameters transmitted by the F-PLC
can be checked and confirmed.
