27
WIRING EXAMPLE (WITH EXTERNAL CONTACTORS K1/K2)
Figure 27
In order to assure a correct barrier operation, it is necessary to
connect the PINs
2 and 4
of the Emitter
a
ccording to table 6 and
to the "TEST FUNCTION".
If no beam is intercepted (and if need be after actuating the restart key), the Receiver
supplies a voltage of 24 VDC to both outputs. The required load must therefore be
connected between the output connections and 0 VDC.
Figure 28
“M” MODELS
(With Muting)
SLC/SLG 415
Max. Load
500mA
Max. Load
500mA
Summary of Contents for SLC 415
