EN
Operating instructions pages 1 to 6
Translation of the original declaration of conformity
1
SRB 201ZH
Operating instructions
Safety-monitoring modules
EN
Content
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety-monitoring module The opera-
ting instructions must be available in a legible condition and a complete
version in the vicinity of the device
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation
The machine builder must carefully select the harmonised standards to
be complied with as well as other technical specifications for the selec-
tion, mounting and integration of the components
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information
Caution:
Failure to comply with this warning notice could
lead to failures or malfunctions
Warning:
Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine
1.4 Appropriate use
The products described in these operating instructions are developed to
execute safety-related functions as part of an entire plant or machine It
is the responsibility of the manufacturer of a machine or plant to ensure
the correct functionality of the entire machinery or plant
The safety-monitoring module must be exclusively used in accordance
with the versions listed below or for the applications authorised by the
manufacturer Detailed information regarding the range of applications
can be found in the chapter "Product description"
To avoid EMC disturbances, the physical ambient and opera-
tional conditions at the place where the product is installed,
must meet the provisions laid down in the paragraph "Electro-
magnetic Compatibility (EMC)" of DIN EN 60204-1
1.5 General safety instructions
The user must observe the safety instructions in this operating instruc-
tions manual, the country-specific installation standards as well as all
prevailing safety regulations and accident prevention rules
Further technical information can be found in the online
catalogue on the Internet: wwwschmersalnet
The information contained in this operating instructions manual is provi-
ded without liability and is subject to technical modifications
The entire concept of the control system, in which the
safety component is integrated, must be validated to
EN ISO 13849-2
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed
1
11 Function 1
12
Target group: authorised qualiied personnel
13 Explanation of the symbols used 1
14 Appropriate use 1
15 General safety instructions 1
16 Warning about misuse 2
17 Exclusion of liability 2
2
21 Ordering code 2
22 Special versions 2
23 Destination and use 2
24 Technical data 2
25
3
31 General mounting instructions 3
32 Dimensions 3
4
41 General information for electrical connection 3
5
Operating principle and settings
51 LED functions 3
52 Description of the terminals 3
53 Notes 3
6
61 Functional testing 4
62 Maintenance 4
7
71 Disassembly 4
72 Disposal 4
8
81 Wiring examples 4
82
83
9
91 EC Declaration of conformity 6
x000 / Juni 2013 / v
A - 101
166043-EN / D / 2012-04-26 /
AE-Nr
2555
