background image

8

Operating instructions

Safety-monitoring module

SRB 202CS / SRB 202CS/T / SRB 202CA/T /  

SRB 202CA/QT / SRB 202CA / SRB 202CA/Q

EN

SRB202C...-B-EN

8.6  EC Declaration of conformity

EC Declaration of conformity

Translation of the original declaration of conformity

valid as of December 29, 2009

Elan Schaltelemente GmbH & Co. KG
Im Ostpark 2 · 35435 Wettenberg

Germany

Internet: www.elan.de

We hereby certify that the hereafter described safety components both in its basic design and 
construction conforms to the applicable European Directives.

Place and date of issue:

Wuppertal, October 6, 2009

Authorised signature

Heinz Schmersal

Managing Director

Name of the safety component:

SRB 202CS / SRB 202CS/T / 

 

SRB 202CA/T / SRB 202CA/QT / 

 

SRB 202CA / SRB 202CA/Q

Description of the safety component:

Safety-monitoring module for emergency 

stop circuits, guard door monitoring, 

magnetic safety switches and AOPD's

Harmonised EC-Directives:

2006/42/EC EC-Machinery Directive
2004/108/EC EMC-Directive

Person authorized for the compilation  
of the technical documentation:

Ulrich Loss
Möddinghofe 30
42279 Wuppertal

Notified body, which approved the full 

 

quality assurance system, referred to  
in Appendix X, 2006/42/EC:

TÜV Rheinland Industrie Service GmbH
Alboinstraße 56
12103 Berlin
ID n°: 0035

Elan Schaltelemente GmbH & Co. KG

Im Ostpark 2, D - 35435 Wettenberg

Postfach 1109, D - 35429 Wettenberg

Telefon:  +49 (0)641 9848-0

Telefax:  +49 (0)641 9848-420

E-Mail:  info-elan@schmersal.com

Internet:  www.elan.de

Appendix

Note

The currently valid declaration of conformity can be  

downloaded from the internet at www.schmersal.net.

Summary of Contents for SRB 202CS/T









Reviews: