background image

8

Operating instructions
Safety-monitoring module

SRB 308IT

EN

SRB308IT

-B-EN

Appendix

EC Declaration of conformity

Translation of the original declaration of conformity

valid as of December 29, 2009

Elan Schaltelemente GmbH & Co. KG

Im Ostpark 2 · 35435 Wettenberg

Germany

Internet: www.elan.de

We hereby certify that the hereafter described safety components both in its basic design and 

construction conform to the applicable European Directives.

Place and date of issue:

Wuppertal, October 6, 2009

Authorised signature

Heinz Schmersal

Managing Director

Name of the safety component:

SRB 308IT

Description of the safety component:

Safety-monitoring module for emergency 

stop circuits, guard door monitoring,  

magnetic safety switches and AOPD's

Harmonised EC-Directives:

2006/42/EC EC-Machinery Directive

2004/108/EC EMC-Directive

Person authorized for the compilation of the 

technical documentation:

Ulrich Loss

Möddinghofe 30

42279 Wuppertal

Notiied body, which approved the full 

quality assurance system, referred to in 

Appendix X, 2006/42/EC:

TÜV Rheinland Industrie Service GmbH

Alboinstraße 56

12103 Berlin

ID n°: 0035

8.5  EC Declaration of conformity

Note

The currently valid declaration of conformity can be  
downloaded from the internet at www.schmersal.net.

Elan Schaltelemente GmbH & Co. KG

Im Ostpark 2, D - 35435 Wettenberg
Postfach 1109, D - 35429 Wettenberg

Telefon:  +4 9 (0)6 41 9848-0

Telefax:  +49 (0)641 9848-420

E-Mail: 

info-elan@schmersal.com

Internet: www.elan.de

Summary of Contents for SRB 308IT









Reviews: