Schmidt EAR Series, Instruction Manual

8

3.3  Settings

General information: 

The settings for: 
- Zero setting (auto zero) 
- Timeout 
- Display backlight
- Calibration weight 
of the balance can be changed in the following way.

Requirement

:

Instrument switched off as described in Chapter 3.2.2.

Zero setting:

- Press and hold the 

 button and switch on the instrument with the 

 button. 

  The display shows 

 .

- By pressing the 

 button, you can now choose between

  Manual 

 zero setting

  Automatic 

 zero setting

  No function 

 .

  The default setting is 

 automatic zero setting.

- You can now either return to the measuring mode by pressing the 

 button 

  five times  

or 

  Press the 

 button once to set the 

Timeout

:

- By pressing the 

 button, you can now choose between

  No power off 

  Power off after 5 min. 

  Power off after 10 min. 

  Power off after 20 min. 

  Power off after 30 min. 

  of non-use. 

  The default setting is 

 power off after 20 min.

- You can now either return to the measuring mode by pressing the 

 button 

  four times 

or 

  Press the 

 button once to set the 

3.3.1 Function Settings