Schmidt EAR Series, Instruction Manual

6

Have you read and understood the Operating Instructions, in particular Chap-

ter 1 “Basic Safety Notices”? You are not permitted to operate the device be-

fore doing so. Before working with the device you must put on your personal 

protective clothing, if necessary. For example, eye protectors, gloves, etc.  

The ID plate with the serial number is provided on the back side of the instru-

ment and the CE mark as well.

3 

Initial Setup and Operating Procedure

3.0  Notices Before Starting Measurement

3.1.1 Display Details

Reading

ready symbol

Zero symbol

NET symbol

reading in g

reading in g/m²

3.1  Operating Elements

1

Platform

Sample measuring plate

2

Charge LED

Lights up while charging

3

Display

See Chapter 3.1.1

4

Off button

Switches the balance On

5

Mode button

Toggles between “g” and “g/m²”

6

Tare key

For determining the net weight with the packaging on

7

Base feet

4 adjustable feet at the bottom of the instrument

8

On/Zero key

For switching on and zero setting of the balance

9

Bubbel level

For horizontal alignment of the balance

10 Connector

For connecting the AC adapter

fig. 3.1

1

2

3

4

5

6

7

8

9

10

fig. 3.1.1