I/2
CPM 310-10-20 W
GB
Table of contents - Part 1
1.1 Scope of delivery
– Compressor with instruction manual
– Oil dipstick
– Documents accompanying compressed air
vessel
1.2 Conventional use
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
Any other type of use is considered contrary
to the intended use.
The compressor must
not
be used in poten-
tially explosive areas. Combustible, caustic
or toxic gases must
not
be sucked in!
1.3 Technical data
see Fig. 1a
1.4 Components
1.5 Commissioning
1.5.1 Before first use
L
Replace the sealing plug with the oil dip-
stick (item 03) and fill with compressor
oil. For oil quantity, see "Technical data"
chapter.
1.6 Vessel inspections
Compressor with type test:
Inspection is
not required prior to commissioning.
Type identification: see compressor type
plate
We recommend that a "qualified person"
perform a pressure test on the vessel, de-
pending on its rate of utilisation, after 10
years in accordance with the Ordinance on
Industrial Safety and Health. Contact any of
our service partners.
L
It is essential to retain vessel documents
included in the delivery (= certification
documents) for the entire service life of
the vessel. The statutory specified inspec-
tions must be arranged in accordance
with the applicable regulations of the re-
spective country in which the vessel is
used.
1.1
Scope of delivery ......................
2
1.2
Conventional use ......................
2
1.3
Technical data ..........................
2
1.4
Components.............................
2
1.5
Commissioning .........................
2
1.6
Vessel inspections .....................
2
01 Compressor unit
02 Intake filter
03 Oil dipstick
04 Oil drain screw
06 Pressure pipe
07 Check valve
08 Vessel
09 Condensate drain valve
10 Pressure switch with ON/OFF switch
11 Safety valve
12 Pressure gauge (vessel pressure)
13 Pressure gauge (working pressure)
14 Electric motor
18 Filter pressure reducer
19 Quick-action coupling (clean, regu-
lated compressed air)
Summary of Contents for CPM 310-10-20 W
Page 51: ......
