Hotplate 26060 FB - 26150 FB
STATE March 2010
5
The proper use includes observing the operating manual and conditions of inspection and
maintenance.
After cleaning of device check loosened connections, raw rubbed parts and damages.
All detected faults have to be repaired immediately!
Always tighten firmly screwed connections loosened for maintenance and repair purposes!
If dismantling of safety devices is required at setting up, maintenance or repair, the assembly and
checking of all safety devices has to be carried out immediately after finishing the maintenance
and repair works.
Before putting into operation after maintenance works make sure that all protection advises have
been mounted!
Provide safe and environment conserving disposal of operational and auxiliary materials as well
as of replacement parts.
Don’t use device for unsuitable purposes!
Safety guidelines
During the production of your device all safety guidelines, in particular VDE and international CEE
regulations have been observed.
Your device passed final control before leaving the plant and all electrical components were
checked on proper functioning.
Contact protection according to VDE-regulations has to be guaranteed by correct assembly.
