GB
12
Installation
!
his instruction manual contains all the information
needed for the proper installation, operation and
maintenance of this appliance.
!
The information and technical specifications
contained in this booklet are subject to change, and
the manufacturer reserves the right to make all
changes deemed necessary in light of advances
made in the technologies used, without prior notice.
!
This manual illustrates and describes all the possible
configurations for the appliance and all the
accessories even though some parts are optional and
only supplied upon request.
!
To extend the life of your appliance and guarantee
the highest level of safety during use, it is
recommended that you carefully follow the instructions
contained in the manual and not make any electrical or
mechanical modifications to the appliance itself or the
exhaust ducts.
!
In case of a breakdown, contact an authorized
service center and make sure to ask for original spare
parts.
This appliance is marked according to the European
directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE). By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product.
The symbol on the product, or on the documents
accompanying the product, indicates that this
appliance may not be treated as household waste.
Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. Disposal must be carried out in
accordance with local environmental regulations for
waste disposal.
For more detailed information about treatment,
recovery and recycling of this product, please contact
your local city office, your household waste disposal
service or the shop where you purchased the product.
Electrical connection
Warning: this appliance must be earthed.
Before installing the hood it is vital to ensure that the
mains voltage corresponds to the voltage
indicated on the unit’s specifications plate.
Only a recognized electrical fitter should connect the
unit to the mains power supply.
The unit is fitted with a connection flex in accordance
with European standards.
Reward: if it is intended to connect the appliance
permanently to the mains the plug supplied
must be removed and safely dispose of.
The appliance must then be fitted to a double pole
switch conforming to current regulations
with a minimum opening distance between contacts of
3mm.
The manufacturers are not liable for any problems
caused by the user’s failure to observe the
above instructions.
