16
GB
The glue applied on the gaskets leaves traces of
grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.
A few seconds after the hob is connected to the
electricity supply, a buzzer will sound. The hob may
now be switched on.
Switching on the hob
To switch the hob on, press and hold the
button
for about a second.
Switching on the cooking zones
Each cooking zone is controlled by a device
consisting of two buttons (- and +).
Press the + button to activate the hotplate, then
set the power to the level required using the - and
+ buttons.
To set the power to maximum, hold down the -
button briefly.
Booster function*
The booster function for the rear cooking zones may
be used to shorten heating-up times. It is activated by
pressing the
button. P appears on the power
indicator display. This function boosts the power of
the relevant zone to 3000W.
It stops automatically after 4 minutes. Until the booster
of one of the rear zones is activated, the front zones
have a maximum power of 600 W (e.g. if the left rear
hotplate booster is activated, the power of the left front
hotplate decreases).
Oval cooking zones*: may be used with the booster
only if the whole oval is activated.
Do not put two small pans on the oval cooking
zones.
Switching off the cooking zones
Press the -button: the power of the cooking zone
will progressively decrease until it is switched off.
Alternatively, the - and + buttons may be
pressed simultaneously. This immediately returns
the power setting to 0 and the cooking zone
switches off.
Programming the cooking duration*
All the cooking zones may be programmed for a
length of time between 1 and 99 minutes.
1. Select the cooking zone with the corresponding
button.
2. Set the temperature.
3. Press the
button.
3. Set the cooking time using the - and + buttons.
4. Confirm the settings by pressing the
button.
The timer begins counting down immediately. A buzzer
sounds for about 1 minute and the cooking zone switches
off when the set programme has finished.
Repeat the above procedure for each hotplate you
wish to programme.
Control panel lock
When the hob is switched on, it is possible to lock the
oven controls to avoid accidental changes to the
settings (by children, during cleaning, etc.). Press the
button to lock the control panel and the indicator
light above the button will be lit. To use any of the
controls (e.g. to stop cooking), you must switch off
this function: press the
button for a few moments,
the indicator light will switch off and the lock function
is removed.
Switching off the hob
Press the
button to switch the appliance off.
If the control panel lock is on, the controls will
continue to be locked even after the hob is switched
on again. In order to switch the hob on again, you
must first remove the lock function.
Start-up and use
*
Only available on certain models.
All manuals and user guides at all-guides.com
all-guides.com
