6
Installation (continued)
6
Installing the weight
□
Insert the weight (J) onto the clip (K) by sliding
it down onto the clip (K).
□
Install the weight clip (K) at the point of the
hose marking “weight here”.
5
Attaching the quick connector
to the receiving block
□
Push the quick connector (F) firmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
1
F
J
K
J
Weight
here
Weight
here
K
7
Making the water supply
connections
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
NOTE:
The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
1
2
