Aiming of Sylvania Sportsline LED Floodlight
Aiming of Sylvania Sportsline LED floodlights
1. Fit Sylvania Sportsline to cross arm noting that OVERSLUNG units are on top and
UNDERSLUNG units are underneath the cross arm. Under-slung floodlights are offset
automatically from over-slung floodlights when mounted on single cross-arm. Cable glands
should be on back edge of connection box in both cases.
2. Tilt angles can be pre-set using the scale on the side, before cross arm lifting, (see notes 7 &
8 below for details). This angle relates to front tilt, which is 30 degrees different from beam
peak angle for asymmetric fittings, i.e.
70 degree peak beam angle from design is 40 degree
front panel tilt.
3. Place markers such as safety cones, (visible from floodlight), at aiming points according to
lighting design aiming diagram and schedule. These points will either be the peak point or,
to minimise the number of targets, a crossover point may be used for multiple fittings, or
crossing a reference line.
Peak point
Crossover point
