schroff VME64x, User Manual

VME64x System Subrack 2 U

Safety

20836-245

www.schroff.biz

1

R1.0, July 14, 2009

1  Safety

1.1  Intended Application

The VME64x system subrack, described in this manual, is intended as a 
platform for a microcomputer system based on the VME64x bus system
(VITA 1.1-1997).
The VME64x system subracks are designed for protection class IP 20 and can 
be used only in the resp. environments. 
For higher protection requirements, a.e. IP 54/55 you must install the system 
subrack in a protective case.

VME64x system subracks are not finished products, so there is no valid 
approval for these units. In order to enable stand-alone functionality, additional 
elements are required. An operational system is achieved only by way of 
appropriate VME64x boards.
The completion and final testing of the units have been carried out, or at least 
supervised, by qualified technicians. These instructions are directed exclusively 
to these qualified technicians i.e.engineers, trained and qualified electricians 
etc. 

Make sure that:

•

the assembled unit complies with the safety regulations currently applicable 
in the country it is going to be used.

•

the overall unit complies with all other regulations and specifications at the 
place and country of use, e.g. interference limits, approval by the telecom-
munications authorities.