22
3.5.2 Pad elements (for contourable upper body support)
The reclining surface growth is compensated
by adding/removing pad elements (
A = in-
termediate piece
), which are fixed by means
of hook and loop press studs (
B
). Remove the
pad elements (
A
) prior to every adjustment
to the upper body support (see
Point 3.5
)
and reattach the required combination of
pads.
At the lower edge of the upper body sup-
port pad (
C
) there is a connection piece (
D
).
To this, up to three intermediate pieces (
A
)
as well as one end piece (
E
) can be affixed
using press studs (
B
).
Depending on how the upper body support
length is adjusted, the intermediate pieces
(
A
) must be removed or added and the end
piece (
D
) might have to be moved upwards
by 1-3 positions (
F
).
To remove a pad, loosen the press studs on
both sides of each pad (
B
). Please store pad
elements that are not required in a dry place.
3. Settings.
A
E
D
E
F
E
B
C
D
