18
7. Coupling and decoupling on the go.
The
follow-me momo.
allows the user
to couple and uncouple the
momo
tricycle.
whilst underway in case the
traffic becomes hazardous or the child
tires. Once the child has recovered, or
the traffic situation has improved, the
tricycle can easily be uncoupled once
more from the adult bicycle.
In the initial position, the
follow-me
momo.
is suspended via suspension
straps or a suspension bracket. To
couple it, release the strut (
A
) on the
snap hook of the suspension strap or
suspension bracket. Then, if neces-
sary, wind the loose suspension strap
around the saddle tube and attach
the snap hook to the saddle linkage.
Then unfold the strut and hook it into
the pin (
B
). Pull the locking pin (
C
) out
of the clamping plate to the side and
secure the strut (
A
) with it. Ensure that
the spring washer closes completely. If
not, rotate the splint by 180° and clo-
se the spring washer again. Fold the
telescopic bracket (
D
) downwards
and unscrew the two handle nuts (
E
).
Now insert the tricycle, whilst lifting the
follow-me momo.
with one hand – the
tricycle should always remain on the
ground. Once the axle extensions (
F
)
have been inserted into the clamping
plate (
G
), pull up the telescopic bra-
cket (
D
) and hook it into the adapter
clamp (
H
). Then tighten the handle
nuts (
E
) on both sides. To uncouple,
simply follow the instructions back-
wards.
A
E
D
G
F
E
D
B C
A