background image

07

2. Product description.

2.4 Riding response

If 

follow-me momo.

 is used to couple a 

momo tricycle.

 to the lead bicycle, 

the riding response changes. We therefore recommend to practice hand-

ling the 

follow-me momo.

 at first away from public road traffic and at first 

without user on the 

momo tricycle.

. Only when you feel safe riding the lead 

bicycle, slowly start practicing with a user on the 

momo tricycle.

 to also get 

a safe feeling for this situation.

Consider the following aspects when riding:

• Before starting to ride, check the functionality of the brakes with  

a test brake.

• Always drive carefully on wet, smooth and loose ground and avoid  

jerky pedaling.

• When riding and especially when turning, always pay attention to the 

overall width of the rear wheels of the coupled tricycle. This differs  
significantly from the one of the lead bicycle.

• During fast cornering, care should be taken to ensure that the speed is 

reduced in advance, as a tricycle can also topple over.

• Never ride without hands.
• Drive with lighting in dark conditions and poor visibility to increase  

visibility for other road users.

• For your own safety, we recommend wearing a bicycle helmet to both 

the rider of the lead bicycle and the rider of the tricycle.

• Avoid continuous operation in a salty environment as this will promote 

damage from corrosion.

• When braking, the cyclist of the lead bicycle should always actuate 

both brake systems that work independently from each other.

Summary of Contents for follow-me momo

























Reviews: