Schuchmann franka, Instructions For Use Manual

13

3. Settings.

3.8 Adaptation of seat pans

franka.

 is prepared to carry a seat unit / seat 

pan. The seat adapter represents the connec-
tion point.

Seat pan adapter, standard:

Insertion of the seat adapter into the seat pan 
support:
1. Insert the adapter into the rear tube of the  
  seat pan support.
2. Fold the adapter down to the front tube. The lock will engage  
 automatically.
3. When removing the seat pan, first untwist the knurled screw on the  
  adapter, and then pull on the knob to release the connection between  
  the adapter and the seat pan support. Tilt the pan slightly and remove 
 it.

Seat pan adapter, trapezoidal shape:

Place the seat pan with the trapezoidal sha-
ped mounted adapter piece on the trapezoi-
dal shaped seat pan support plate and push 
back. Here the patented closure engages au-
tomatically. Now tighten the knurled knob (

A

) 

of the patented closure. When removing the 
seat pan, first untwist the knurled knob (

A

), 

and then pull it down to release the connec-
tion between the adapter and the seat pan 
support. The pan can now be pulled away to 
the front.

3.9 Anti-tip mechanism

The anti-tip mechanism is adjustable in 
height. To adjust the height, open the lever (

B

), 

position the anti-tip mechanism to the requi-
red height and close the lever once more.

3.10 Wheel base extension

The wheel base extension cannot be adjusted! It is used purely to keep the 
product steady, in particular with large seat pans and extremely tilted seat 
angles.

The wheel base extension is not adjustable!

A

B