14
4. Accessories.
4.3 Headrest
In order to attach and set the head-
rest, press the button for height ad-
justment (
A
). Insert the headrest into
the opening (
B
) provided and set the
required height.
Now let go of the button (
A
) and set the
required height until it audibly clicks
into place. In order to adjust the depth
and angle of the headrest, release the
oval twist lever (
C
), set the headrest to
the required position and tighten the
lever again.
4.4 Thorax pelotte pads
The thorax pelotte pads are available
with or without a chest strap and en-
sure that the upper body is securely
positioned. They can be separately
adjusted in height, angle and width
with the twist lever (
D
) behind the
backrest. In order to attach and/or set
the thorax pelotte pads (
E
), loosen the
twist lever (
D
) and attach them above
the rail on the rear of the back. Set the
height, angle and width of the thorax
pelotte pads for the patient by pus-
hing the pelottes up and down, moving
the slot back and forth and by turning
the clip (
F
) around the twist lever. Tighten the twist lever (
D
) once the required
position has been reached. See
4.2
for removal of the pads.
C
B
D
E
F
C
A
