13
4. Accessories.
4.2 Thorax pelotte pads with standard back
The thorax pelotte pads are available
in normal and long versions (with torso
guide). Both versions are individually
adjustable in height and width. Pull the
pad cover off the rear side of the back
and loosen the two cylinder head
screws with a hexagonal wrench (
A
).
Bring the thorax pelotte pad into the
required position and retighten the
screws. Then fasten the pad cover
onto the rear side of the back again.
4.3 Thorax pelotte pads at the back
with integrated upper arm guide
The thorax pelotte pads are available
in normal and long versions (with torso
guide). Both versions are individually
adjustable in height and width.
Height adjustment
Open the zips on the front side of the
back pad and pull off the pad cover
on the rear side of the back. Then loo-
sen the 2 cylinder head screws with a
hexagonal wrench (
B
) and bring the
thorax pelotte pad to the required
height. Retighten the screws and fas-
ten the pad cover on the rear side of
the back again before closing the zips.
Width adjustment
Pull the material on the front of the
thorax pelotte pad to the side. Loo-
sen the screws underneath them (
C
)
and bring the thorax pelotte pads
to the required width. Retighten the
screws and cover them again with the
cover fabric.
A
B
C