12
3. Settings.
3.7 Foot support
The angle and height of the foot support (
A
)
can be adjusted. It has a non-slip surface (
B
)
and has 8 slits (
C
) to attach straps such as
foot cuffs or foot positioning aids.
In order to adjust the knee angle, please
loosen the clamping lever (
D
) under the seat
surface, bring the foot support into the re-
quired position and retighten the clamping
lever (
D
).
In order to continuously adjust the height,
please loosen the four grub screws (
E
), bring
the foot support into the required position
and retighten the grub screws (
E
).
After each adjustment, please retighten the
clamping lever and the grub screws!
3.8 Castors
In general, the therapy chair should be
locked by braking the castors to avoid un-
intentional rolling away. To do this, press the
brakes (
F
) down with the tip of your foot.
The brakes are only used for the purpose to
prevent unintentional rolling away on level
surfaces.
A
B
C
D
E
E
F
F
F
F
