15
15
4. Accessories.
4.4 Adjustable pelvic guide
The adjustable pelvic guide can be adjusted
in width, provides the user with a high level of
security and positions the pelvis.
At first, loosen the cylinder head screw (
A
) on
the rear of the therapy chair at the bottom
edge of the cover. Then push the front of the
pad down slightly and loosen the hexagon
socket screw (
B
).
Now please position the user in the chair and
bring the pelvic guide into the desired posi-
tion. First tighten the cylinder head screw (
A
)
again and only then lift out the user. Now
you only need to tighten the hexagon socket
screw (
B
) and then you can lift the user back
into the chair.
After each adjustment, please retighten all
screw connections!
4.5 Therapy table
The therapy table can be adjusted in height
and depth. For the installation, the tubes (
C
)
are pushed into the receiver tubes (
D
) below
the armrests.
Height adjustment takes place via adjust-
ment of the armrests (see
Point 3.6
).
To change the depth, please loosen the two
wing screws (
E
) and bring the table into the
desired position. Additionally also the bra-
ckets (
F
) of the table can also be moved. To this
end, loosen the hexagon socket screws (
G
),
remove them and fix the brackets at the po-
sition provided (
H
). As soon as the armrests
(see
Point 3.6
) are adjusted in width, also the
brackets of the table must be adjusted. To
this end loosen the hexagon socket screws (
G
)
at the respective bracket and bring it in the
necessary position.
After each adjustment, please retighten all
screw connections!
A
B
C
C
E
E
G
D
D
G
F
F
H
H
