13
4. Settings.
4.7 Forearm rests (optional)
The forearm rests can be equipped with a
handle or grip ball. They can be adjusted in
depth, height, angle and inclination.
Depth adjustment
Loosen the cylinder head screw with inner hexagon (
A
) beneath the lower
armrest. Now you can slide it onto the pipe (
B
)
and bring it into the required position.
Please pay attention to the adjustment mark on
the pipe (B).
Height adjustment
The handles are used to set the height (see
Point 4.1.1
+
4.1.2
).
Adjustment of the angle
The angle (
C
) is set using a locking hinge. Loo-
sen the cylinder head screw with inner hexa-
gon (
A
) beneath the forearm rest and bring
the forearm rest into the required position.
Angle adjustment
Loosen the cylinder head screw with inner he-
xagon (
A
) beneath the forearm rest to set the
inclination (
D
) and bring the forearm rest into
the required position.
4.8 Grip / grip ball for forearm rests
Please loosen the hexagon socket screws (
E
) and bring the grip (
F
) or grip
ball (
G
) into the required position.
After each adjustment, please re-tighten all screw connections!
4. Settings.
A
B
E
F
G
C
D
