28
4.16 Therapy table
The therapy table (
A
) is mounted with the aid of
an adapter clamp (
B
) onto the top frame (
C
) of
the
dynamic pacer.
and/or the base frame of the
pacer
. (Size 0 mini) attached (see
Point 2.7.1
).
In order to change the position of the therapy
table (A):
• Loosen the screw (
D
) and bring the therapy
table into the required position.
In order to change the angle of the therapy
table (A):
• Loosen the screw (
E
) and bring the therapy
table into the required position.
In order to adjust the height of the therapy
table (A):
• Press the button (
F
) on the adapter clamp
(
B
) and bring the therapy table into the
required position. An audible clicking noise
is heard when the therapy table has enga-
ged.
In order to remove/mount the transparent
plate (G) of the therapy table (A)
:
• Insert your fingers into the holes (
H
) from the rear, and press the plate (
G
)
out using some force.
• Mount the plate (
G
) by inserting the moulds (
I
) into the recesses (
J
) and
pushing down the plate (
G
) with some force.
In order to prevent tipping and injuries:
Do not use the therapy table to support the body!
Never leave the user unsupervised!
Do not load the therapy table with more than 4.5 kg!
4. Accessories.
A
G
H
I
J
D
-E
B
F
C
Summary of Contents for rifton dynamic pacer
Page 1: ...Instructions for use dynamic pacer The dynamic gait trainer dynamic pacer ...
Page 42: ...42 Notes ...
Page 43: ...43 Notes ...
Page 44: ...schuchmann de GA 33 EN_1 0 ...