12
2.10 Transfer
till.
can also be pushed carefully and slowly
during use (e.g. to other rooms). Here we
highly recommend transferring the user in
the supine and lowest position.
The following measures must be taken
beforehand:
• all fine adjustments to the individual
components must have been carried out
(see
Point 3
).
• the user must have been secured against
unintentional falling out of the frame (see
Point 3.8
).
• the supine and standing position must
have been reduced to the smallest
possible adjustment (see
Point 3
).
The following holding and pushing points are
provided on
till.
for transfer:
For size 1+2 in the supine position:
• Shoulder (
A
) or push bar (
C
- if available)
and leg supports (
B
) at the same time
For size 1+2 in the standing position:
• Push bar (
C
- if available)
• Back (
D
) and leg supports (
B
) at the same time
For size 3+4 in the supine position:
• Shoulder (
E
) or push bar (
G
) and
leg supports (
F
) at the same time
For size 3+4 in the standing position:
• Push bar (
G
)
• Back (
H
- nor above the hip) and leg supports (
F
) at the same time
Make sure that always the two points mentioned are used when pushing in the
standing position without push bar to guarantee safe transfer.
Make sure that when transferring size 3+4 in the standing position, the user
must not be pushed above the hip at the back and that in general there is the risk
of tripping over the sub-frame when pushing.
2. Product description.
C
D
B
A
B
C
F
E
F
H
G
