16
3. Settings.
3.4 Angle adjustment (via motor)
The angle adjustment of the reclining
surface
for sizes 3+4
is done using an
electrical motor (see
Point 3.3
for
sizes 1+2
). It
has a safety switch-off (see
Point 4.13.4
) and
is controlled manually (
A -
see
Point 4.13.5
).
The reclining surface can be adjusted in a
range from 0° to 90° (see
Fig. 1)
. In order to
change the reclining surface angle, press
buttons
B
and
C
. Using button
B
move the
reclining surface into the horizontal and
with button
C
into the vertical. Release the
respective button as soon as you have
reached the desired angle.
Keep in mind that sizes 3+4 of
till.
are
equipped with an additional safety system
for maximum stability in any situation. This
safety system ensures that the reclining
surface can only be adjusted from 45° to
90° if a predefined height has not been
exceeded (see
Point 3.2
).
To determine the reclining surface angle
there is a scale (
D
) on both sides at the
adapter, with the help of which you can
orientate yourself quickly and easily and read
the angle.
0°
90°
Fig. 1
A
B
C
D
