27
4. Accessories.
4.7.1 Pads for knee pelotte pads
This pad (
A
) which can be fixed around the
respective leg of
till.
is used for additional
support of the knee and to prevent excessive
hyperextension of the knee (genu recurva-
tum).
4.8 Footrests
The footrests are available as "standard" version (see
Point 4.8.1
) and "flex"
version (see
Point 4.8.2
).
4.8.1 Footrests (standard)
The footrests (standard) provide the feet
with 15° range outwards (
B
). For inward
rotation the individual plates of the footrests
can be exchanged. To do this, loosen the
screws (
C
) below the plates, exchange them
and tighten the screws (
C
) again.
If the foot plates have been exchanged, a
collision with the sub-frame is possible, or the
maximum tilt and minimum standing height
can no longer be reached.
4.8.2 Footrests (flex)
The footrests (flex), like the foot rests
(standard) offer a rotation range of +/-15°
(see
Point 4.8.1
). Furthermore they can be
adjusted to a Pes equinus (0°-20°) or Pes
suppinatus (0°-15°). To do this, turn the
hexagon socket screws (
D
) anti-clockwise
to bring the footrests into the Pes equinus
position. Turn the screws (
D
) in clockwise
direction to bring the footrests in Pes suppi-
natus position. To adjust the footrests (flex) to a Pes valgus, operate the
hexagon socket screws (
E
) and position the footrests as desired.
After each adjustment, please retighten all screw connections!
C
C
A
15°
15°
B
D
E
