29
4.9 Wooden therapy table
The wooden therapy table (
A
) has an edge
and attached in the front and removed,
adjusted in depth, height and angle.
To mount the table, the table rods (
B
) must
be inserted in the table adapters (
C
) on the
frame of
till.
and fixed with the twist grips
(
D
).
To adjust the depth, loosen the twist grips (
D
)
on both sides and bring the wooden therapy
table (
A
) into the desired position.
To adjust the height, please loosen the
hexagon socket screw (
E
) on both sides and
bring the wooden therapy table (
A
) to the
desired height.
To adjust the angle, please loosen the
hexagon socket screw (
F
) on both sides and
bring it into the desired position.
An additional height adjustment can be
carried out using the table rods (
G
). To do
this, loosen and remove the 4 twist grips (
H
).
Now loosen the twist grips (
D
) and rotate the
tubes (
G
) by 90° upwards (
I
). Now insert again
the twist grips (
H
) from below into the bores
rotated by 90° and tighten them again.
After each adjustment, please retighten all
screw connections!
4. Accessories.
G
H
B
E
D
F
C
A
I
