Startup
●
Do not touch into the grinding head.
●
Hold the machine tightly with both hands.
●
Before switch on the machine in operation, be sure that any attachment to the handle is
closed.
●
Connect the equipment to the power supply.
●
Before starting the machine, keep away the unit from the surface which will be sanded.
●
The pressure of the grinding machine to the surface should not be too big nor too low. Cru-
cial for an optimal sanding result is the choice of the grinding paper.
●
Turn off the machine after the grinding work.
Cleaning and Maintenance
●
Keep the safety devices, slots and the motor housing free of dirt and dust. Clean the instru-
ment by rubbing with a clean cloth or blowing low pressure air.
●
We recommend to clean the machine after each use.
●
Clean the machine periodically by rubbing with a damp cloth and a little soap-water. Do not
use cleaners or solvents, they may damage the plastic parts. You must also ensure that no
water enters the interior of the maschine.
●
If there are many sparks, you have to inspect the carbon brushes by a qualified electrician.
Attention! Only an qualified person may replace the brushes.
20
www.schuller.eu
Caution, risk of injury!
Wear your personal protective equipment!
Caution, risk of injury!
The maschine may only be put into operation if no errors are found. If a part is
defective, it must necessarily be replaced before the next use.
Risk of injury from unintentional turning on the maschine!
Pull out the plug before you operate on the maschine.
GB
Operating
Summary of Contents for EASY SANDER DS 1220
Page 62: ...62 www schuller eu ...
