1. Assembling Process
Step 1: Fix the heater on the floor. Bore three holes in the floor, fix the
heater by three wedge bolts on the floor tightening the screws by
spanner.
Complete!
T
his warning symbol indicates that the surface is hot and
caution is required.
T
his warning symbol indicates that the heater should not be
covered.
Operation
Connect the power cable to a 13 amp supply that is located in a safe,
dry area.
Press the power switch on the heater when the plug had been
connected.
Press the touch switch one time to operate the heater on 1200W.
Press the touch switch second time for off.
Although the patio heater is shower proof, do not use when raining
or in wet conditions.
Always disconnect the power cable from the electrical supply, when
the patio heater is not in use.
0/1200W
