Manual
LS101 / LSW101
Schulte-Schlagbaum AG
Page 2 of 39
LS(W)101_6-703-2 30R1 4_EN.DOCX
Information about this guide
Copyright 2018 by Schulte-Schlagbaum AG
Nevigeser Straße 100-110
42553 Velbert, Germany
Phone: +49 2051 2086-0
Edition:
20190607
Version:
1.4
Document number:
LS(W)101_6-703-2 30R1 4_EN
This edition renders invalid all previous editions.
Information in this document can be changed without prior announcement.
Dissemination and duplication of this document, and use and disclosure of its contents, are
prohibited unless expressly permitted. Violations will incur compensation for damage. All
rights created by patent grant or registration of a utility model or design are reserved.
The information in this document has been compiled in good faith and to the best of our knowledge.
Schulte-Schlagbaum AG extends no guarantee for the correctness or completeness of information
in this document. In particular, Schulte-Schlagbaum AG cannot be held liable for consequential
damage due to erroneous or incomplete information. Mistakes can never be prevented entirely
despite all the effort taken, and so we appreciate when mistakes are pointed out to us.
SAFE-O-TRONIC
®
is a registered trademark of Schulte-Schlagbaum AG.
Safety information and warnings
This guide describes commissioning and operation of a SAFE-O-TRONIC
®
access
LS(W)101 furniture lock.
The device may only be used for the purpose intended by the manufacturer.
This guide must be kept in an easily accessible location.
Unauthorised modifications and the use of spare parts and auxiliary devices that are not sold
or recommended by the manufacturer may result in fire, electric shock and injury. Actions
such as these result in exclusion of liability, and no warranty claims will be accepted by the
manufacturer.
Repairs may only be carried out by the manufacturer.
The warranty provisions of the manufacturer as amended on the date of purchase apply to
the device. Liability will not be assumed for inappropriate manual and automatic creation of
parameters for a device or inappropriate use of a device.
The operating company is responsible for setting up and connecting the device according to
recognised technical regulations in the country of installation and other valid provisions.
