background image

SAG

SAFE-O-TRONIC

Installation

Schulte-Schlagbaum AG

Page 2 of 12

SOT-Manual.DOC

Copyright 1998 - 2003 by

Schulte-Schlagbaum AG

Nevigeser Straße 100

D-42553 Velbert

Tel.: +49 20512086155

With the edition of this document, all previous editions become void. Indications made in this manual may be
changed without previous notice.

Copying of this document, and giving it to others and the use or communication of the contents
thereof are forbidden without express authority. Offenders are liable to the payment of damages. All
rights are reserved in the event of the grant of a patent or the registration of a utility model or design.

Composition of the information in this document has been done to the best of our knowledge. Schulte-
Schlagbaum AG  does not guarantee the correctness and completeness of the details given in this manual
and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all
our efforts, errors may not be completely avoided, we are always grateful for your useful tips.

The instructions given in this manual are based on advantageous boundary conditions. Schulte-Schlagbaum
AG  does not give any guarantee promise for perfect function in cross environments.

Schulte-Schlagbaum AG  assumes no responsibility for the use of any information contained in this document
and makes no representation that they free of patent infringement. Schulte-Schlagbaum AG  does not convey
any license under its patent rights nor the rights of others.

Summary of Contents for Safe-O-Tronic













Reviews: