background image

Drum lighting does not work:

X

Faulty light bulb.  For safety reasons, the lamp should

only be replaced by customer services or a specialist.

Dampness in the room increases significantly:

X

The room does not have sufficient ventilation.

Ensure adequate ventilation.

Door does not open:

X

If no power is available to open the door, you can

open the door manually by pressing next to the door
lock.

Error messages

If the following error messages are displayed, the
programme can be restarted by pressing the start button
once the error has been rectified.

Child lock

X

Hold the start button down and press the fast forward

button.

Door open

X

Push door closed until lock engages.

If the machine displays an F - - error message:

X

Interrupt the programme using the fast forward button

and select a new programme.

If error messages appear repeatedly:

X

Switch off the power for around 1 minute and switch

it back on again. (Pull out the plug or switch off at the
wall).

z

The machine is ready for use again when the

programme control lights flash.

X

Select a new programme.

If an error message appears again:

X

Make a note of the error message.

X

Unplug the machine or switch it off at the wall.

X

Notify customer services.

Customer Services

Before you call customer services, check whether you can
rectify the problem yourself (see «Rectifying minor faults
yourself», page 48).
If advice is required, costs may be incurred if a service
technician is required, even during the guarantee period.

If you cannot rectify a problem yourself, unplug the
machine or switch it off at the wall and call customer
services.
Dial the central customer services number (see back
cover).  You will be automatically connected to the
customer services branch for your region.
Give customer services product and serial numbers.
You will find this information on the type label on the
inside of the door.  

Note the numbers for your machine here:

Product No.:

Serial No.:

Warranty extension

The guarantee period of 2 years can be extended if
required with a warranty extension.

49

Summary of Contents for Fust Novomatic TK 6096














Reviews: