en
Operating the appliance
20
Childproof lock
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock when the
programme has started.
To
activate/deactivate
the childproof
lock, press and hold "Start/Pause" for
approx. five seconds. The
E
symbol is
appears in the display panel.
■
E
lights up: The childproof lock is
active.
■
E
flashes: The childproof lock is
active and the programme selector
has been adjusted. To prevent the
programme from stopping, turn the
programme selector back to the
original programme. The symbol
lights up again.
Note:
The childproof lock can remain
activated until you want to start the next
programme, even after switching off the
machine.
You must then deactivate the childproof
lock before starting the programme and
activate it again as necessary once the
programme has started.
Adding laundry
After starting the programme, you can
add or remove laundry if necessary.
To do this, press the Start/
Pause
button.
The Start/Pause indicator light flashes
and the machine checks whether it is
possible to add laundry.
Note:
Do not leave the door open for
too long when adding laundry as water
from the laundry may leak out.
If the following appears in the display
panel:
■
Both
the
YES
and
¼
symbols light
up, it is possible to add laundry.
■
NO
flashes, wait until the
YES
and
¼
light up.
Do not open the washing machine
door until
both
the
YES
and
¼
symbols are lit.
■
NO
lights up, it is not possible to add
laundry.
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
To continue the programme, select
the
Start
/Pause button. The
programme continues automatically.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Press Start/
Pause
.
2.
Select the other programme.
3.
Press
Start
/Pause. The new
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
1.
Press Start/
Pause
.
2.
To cool the laundry: Select
Rinse
.
3.
Press
Start
/Pause.
For programmes at low temperatures:
1.
Press Start/
Pause
.
2.
Select
Spin
or
Drain
.
3.
Press
Start
/Pause.
Programme end during rinse
hold
– – –
0
appears on the display panel
and the Start/Pause button indicator
lamp flashes.
To end the programme, set the
programme selector to Spin/Drain or
select a spin speed. Then press the
Start
/Pause button.
