13
►
Wash these fabrics in the standard
programme.
heavily soiled
Clearly visible soiling and stains.
►
Increased dosing as per the dosing
recommendation.
►
Pre-treat stains.
►
Select the programme options
Intensive
,
Prewash
or
Soak
.
Notice
Insufficient detergent
►
Only becomes apparent after repeated
underdosing
►
The laundry becomes grey or not
properly clean
►
The laundry becomes hard (board-like)
►
Laundry has grey-brown spots
►
May lead to calcified heating elements
Excess detergent
►
Poorer washing results
►
Foaming over of the detergent and
breakdowns
►
Higher water consuption and costs
►
Increased washing programme length
►
Unnecessary environmental pollution
Liquid detergents and start time
pre-selection
If poured directly into the detergent drawer,
liquid detergent slowly runs out of the
detergent dispenser during the pre-set time
and thickens. If this happens several times,
it can lead to blockages due to detergent
deposits.
►
Use dosing aids such as dosing balls or
bags supplied with the detergent.
Soap-based detergents
Because soap does not contain anything
to prevent limescale, you should only use it
with soft or medium-hard water, together
with a separate water softener.
Notice
Without softerner, limescale and soap
residue can build up in the machine, which
will be deposited on laundry in the form of
grease spots or as limescale on the heating
element.
►
Activate the setting
Soap wash
programme
(see chapter
Settings
).
Water softeners
Special water softening aids can be used in
the water hardness ranges «medium» and
«hard». Dose detergents according to the
hardness level «soft» (follow the instruc-
tions on the packaging).
►
Add the detergent first and then the
water softener into the same compart-
mentfor best washing in results.
Soaking agents
►
Choose the programme option
Soak
.
►
Add the soaking agents to
compart-
ment
of the detergent drawer.
Summary of Contents for Priate household
Page 59: ...59...