52
«Error F ––»
is displayed again
despite programme
restart
►
Acknowledge the error message with
OK
.
►
Interrupt the power supply for one minute (switch the main
switch off and on again). As soon as the display lights,
the appliance is again ready to operate.
►
Press the door until you hear the lock snap shut.
►
Select again a programme and press button
.
«Error F ––»
is displayed again
after interruption
of the power supply
►
Note the error message.
►
Close the water tap and switch off the power supply.
►
Contact customer service (see
Customer service
).
MACHINE OPERATION
Machine does not
start when pressing
the On / Off
button
►
Check whether the mains power is switched on (wall / plug).
►
Check whether all the fuses are intact or the safety switch
has tripped.
Mains blockage (generally at noon).
►
Operate the machine after the mains blockage has ended.
►
If the machine does not start despite correct power supply,
contact customer service.
The washing machine
does not start
►
Press button
.
►
If the programme does not start despite pressing the start
button, contact customer services.
Notice
When time preset is activated, the programme starts only
at the pre-selected time.
Loading door
cannot be opened
Wait until the message
Programme end
is displayed.
►
Press button
Open the door
.
Option
Rinsing stop
selected.
►
To proceed further, see
Washing / Ending programme
with rinsing stop
.
Defect appliance
.
►
Contact customer service (see
Customer service
).
Power outage
.
►
Open the loading door manually.
Summary of Contents for Priate household
Page 59: ...59...