39
Cleaning the moisture sensor
After longer operation, small deposits
(lime, fabric refiner) can form on the
front inner side of the drum on both
sides of the longish moisture sensors.
With moisture controlled programmes,
this can result in the desired level of
dryness not being reached.
►
Wipe deposits away with a cloth soaked
in vinegar.
Emptying for frost protection
or transport
If the machine is in a room susceptible
to frost or is to be transported, it must
be completely emptied.
►
Start any programme.
►
Press the light bar next to
Forward
repeatedly until
Self-cleaning
is
displayed.
►
Allow the programme to finish (without
crease protection).
Self-cleaning
The dryer is equipped with an automatic
self-cleaning function.
At the end of each programme and also
during the drying process, if necessary,
the heat exchanger is cleaned.
A slight knocking noise can be heard
during the cleaning process and the
self-cleaning symbol
is displayed.
Summary of Contents for Spirit 620
