50
Spinning and noise
Pump noise:
No malfunction! Intake noise and «Emptying» noise
(i.e. when the tank is sucked empty) by the detergent
solution pump is normal.
Repeated spinning:
The imbalance control system detected an imbalance
and is rectifying the imbalance by spinning repeatedly.
Poor spin result:
The imbalance control system has detected an im -
balance that it was unable to rectify. With underloads or
critical laundry pieces such as bath mats, the laundry is
insufficiently distributed. The spin speed is reduced
depending on the load and imbalance, safeguarding the
appliance against being overstressed.
Loud noise and «machine movements» during
spinning:
X
The transport securing devices have not been removed.
See the information in the Setting-up Instructions!
X
Machine feet were not locked when setting-up the
ma chine. Relevel the machine with a spirit level and
securely lock the feet as described in the Installation
Instruc tions.
Programme duration extended:
The machine has recognised foam and implemented
remedy. No error.
The machine has recognised imbalance and imple-
mented remedy. No error
The machine has recognised excessive soiling and/or
too turbid rinse water and has extended the programme.
No error.
Customer Services
Before you call customer services, check whether you can
rectify the problem yourself (see chapter «Problems»).
If advice is required, costs may be incurred if a service
technician is required, even during the guarantee period.
The guarantee does not cover faults caused by improper
use and by blocked filtres or foreign bodies.
If you cannot rectify a problem yourself, unplug the
machine or switch it off at the wall, turn off the tap and
call customer services.
Dial the central customer services number (see back cover).
You will be automatically connected to the customer
services branch for your region.
Give customer services the «F – –» error message and
the product and serial numbers. You will find this infor
-
mation on the type label inside the opened door.
Note the numbers for your machine here:
Product-No.
Serial No.
Warranty subscription
After the normal warranty period of 2 years has expired,
it is possible to extend the warranty by means of a
warranty subscription as desired. We are happy to send
you the requested documents.
Please observe the enclosed guarantee and customer
services booklet.
