WSI 100 / 125 / 150 / 200 / 250 / 300
page
29
4
Faults
4.1
Instructions for troubleshooting
The following fault and error messages are shown in the text display
Display:
Text display dark
Cause:
-
Remedy:
Switch customer's main switch on.
Display:
Time monitoring filling procedure
Cause:
Water cock is closed or
Filter in the water-inlet pipe clogged.
Remedy:
Open water cock or clean filter
Display:
No water outflow
Cause:
Outflow fault outside the machine
Remedy:
Check customer's outflow
Display:
Emergency Off actuated or door open
Cause:
Door not closed or locking bolt not locked into place or Emergency Off
switch actuated.
Remedy:
Close door properly (Press hard against the door handle) or unlock Emer-
gency Off-button
Display:
Imbalance too great
Cause:
The unbalance detector has detected too great an unbalance
Remedy:
Avoid underloading the machine
Display:
Imbalance sensor
Cause:
Sensor defective.
Remedy:
Inform Customer Service
Display:
Spreading speed too low
Cause:
Laundry weight too low or water not let out.
Remedy:
Check laundry quantity. Check outlet
Display:
Programme space is empty
Cause:
There is no programme stored under the programme no. selected.
Remedy:
Select valid number.
