WSI 100 / 125 / 150 / 200 / 250 / 300
page
31
Maintenance / Servicing
4.2
General hints
•
Before beginning the cleaning works, the electric power supply to the
machine must be switched off at the customer's main switch.
•
The machine is only separated electrically from the mains supply if the
mains plug has been pulled out or the customer's main switch or fuse
protection has been switched off.
•
No high-pressure cleaner and no jet of water may be used for clean-
ing the machine.
•
No changes, alterations or attempts at repair, especially using tools such
as screwdrivers, etc. may be carried out on or in the
appliance. Incorrectly executed repairs can lead to serious
accidents, damage and operating disorders
.
Important!
•
The drum has been manufactured from stainless special steel.
Ferriferous water or extraneous objects in the laundry to be washed (e.g.
paper clips, nails and suchlike) can lead to the formation of extraneous
rust in the drum.
•
In order that the washing machine can dry after use, the door should not
be shut, but left just ajar.
•
In the event of irregular and incorrect maintenance, deterioration in per-
formance and operating faults cannot be ruled out.
•
Repair works on the extractor may be carried out only by our
Customer Service department or by authorised, trained specialist per-
sonnel. Incorrectly executed repairs can lead to serious accidents, dam-
age and operating disorders. In the case of any
possible repairs only
original spare parts
may be used.
