EN
29
Installing the appliance
Insufficient room ventilation, may pro-
longed the drying time and the increase
the energy consumption.. Do not
install the dryer in an enclosed area or
in any area without fresh air circulation.
►
The dryer must be installed in a room
that is adequately ventilated.
►
During the drying process take care to
ensure that the room is well ventilated
(open windows or the door, unclosable
ventilation openings in the walls or
doors).
Installation area
In order to ensure the stability of the
appliance during spin drying, the instal-
lation area must be firm and level.
Soft floor coverings, e.g. fitted carpets
or coverings with a foamed material
backing are not suitable as an installa-
tion area.
Do not obstruct the ventilation grille
at the bottom of the front of the
appliance, otherwise sufficient flow of
cooling air cannot be guaranteed.
►
Keep the area surrounding the dryer
free of dust and fluff.
Fixing set
For installation on slippery ground, e.g.
installation base with tile surface, two
self-adhesive receptacles secure the
machine from shifting.
You can purchase the following fixing
sets at your specialist retailer or
through our customer services team:
►
Steel fixing set – to be drilled
Order no: S 110
►
Plastic fixing set – to be glued
Order no: 51 215
Keep machine dimensions in mind
The minimum distance between the
machine and the wall or possibly anoth-
er machine is 1 cm.
59.5cm
85cm
63cm
Summary of Contents for WT 14 EFH W
Page 34: ...34 Notizen Notes Appunti ...
Page 35: ...35 ...