background image

7

SPECIfICATIONS

Maximum Continuous Power ..............................100 Watts
Surge Capacity (Peak Power) .............................200 Watts
No Load Current Draw .......................................<0.4 Amps
Wave Form ..........................................

Modified Sine Wave

Input Voltage Range ..................................10.5 – 15.0V DC
Output Voltage ..........................................110V – 125V AC
Low Battery Shutdown ........................... 10.2V – 10.6V DC
High Battery Shutdown .......................... 15.0V – 16.0V DC

Optimum Efficiency

 ....................................................>85%

Dimensions ..........................................5.8"H x .4"W x 1"D
Product Weight ................................... Approximately .8lbs.
AC Receptacles.............................. One, 110V AC -Prong
Fuse ................................... One, 15 Amp (mini spade type)
DC Outlets .......................................One, USB 5V 0.5 Amp

REPLACEMENT PARTS

15 Amp fuses (Littelfuse® mini spade type)

Can be purchased at most electronic component retailers.

12V Accessory Plug and  

(1) Airplane Adapter with Cable

22-99-001494

Summary of Contents for PI-100SL









Reviews: