Basic safety instructions
10
02.00|ROTA NC plus 2 / ROTA NCF plus 2 |en
CAUTION
Danger of limbs being crushed by opening and closing of the
chuck jaws during manual loading and unloading or when
replacing moving parts.
•
Do not reach between the jaws.
•
Wear safety gloves.
•
Observe the safety and accident prevention regulations during
operation of the chuck, especially in connection with
machining centers and other technical equipment.
CAUTION
Risk of burns due to workpieces with high temperatures.
•
Wear protective gloves when removing the workpieces.
•
Automatic loading is preferred.
CAUTION
Risk of damages due to incorrect choice of clamping position for
chuck jaws on workpiece.
If an incorrect clamping position is chosen for the chuck jaws on
workpiece, the base and the top jaws may be damaged.
•
The T-nuts combine the top jaws with the base jaws and they
should never protude over the base jaws in radial direction.
•
The outer diameter of the screwed top jaws must not exceed
the outer diameter of the chuck by more than 10%.
CAUTION
Hazard from vibration due to imbalanced rotating parts and
noise generation.
Physical and mental strains due to imbalanced workpieces and
noise during the machining process on the clamped and rotating
workpiece.
•
Ensure the chuck's axial and concentric runout.
•
Check options for remedying imbalances on special top jaws
and workpieces.
•
Reduce the speed.
•
Wear hearing protection.
