Assembly and settings
16
02.02|AGE-F-XY 31-80|en
Adjusting, removing and replacing the return spring for units
built before June 2016
The unit comprises 4 compression springs
for the return position function. The units are set ex-works in ac-
cordance with the catalog values.
These force values can still be modified slightly on the unit by ad-
justing the setscrews (50).
NOTE
If the setscrews are screwed-in too far, this will cause the unit to
jam (springs on block). This can be recognized if the unit is no
longer performing the complete stroke or is no longer moving.
Setting dimension for the setscrew
The units are delivered ex-works with the following setting dimen-
sions for the setscrews:
Size
31
40
63
80
Setting dimension for
Version 1 [mm]
10+0.2 13.5+0.2 17.7+0.2 18.5+0.2
Setting dimension for
Version 2 [mm]
10+0.2 12.5+0.2 17.2+0.2 18.5+0.2
Setting dimension for
Version 3 [mm]
9.3+0.2 12.5+0.2 15.2+0.2 18.5+0.2
The catalog values have been ascertained in this basic setting.
7.4
Adjusting
