Assembly and Operating Manual
AGE-F-XY
– Compensation Unit with spring return
8
Date printed 28.12.2009
5.3 Setting the back stop to limit stroke
Figure 3: Set screw to limit stroke
Type AGE-E-XY
031
040
063
080
thread diameter
M3
M3
M4
M4
minimum length [mm]
6
12
12
18
Table 4: Dimensions of the set screw (Pos. 51)
If a back stop to limit stroke is to be set:
Note!
The set screw can fall into the housing if it is screwed in too far.
The compensation unit can jam.
- Observe the minimum length of the set screw (see Table 4).
1. Remove the set screw (item 51) with an Allen key.
2. Insert set screw or screw according to Table 4
